Name: FIENZA | Minka Round Solid Surface Above Counter Basin 400x400x120mm -Dusk
SKU: CSB802D
Price: 499.00 AUD
Availability: InStock

FIENZA | Minka Round Solid Surface Above Counter Basin 400x400x120mm -Dusk

$499.00

Buying FIENZA ‘Minka’ Solid Surface Round Above Counter Basin from Infinity Plus Bathrooms.

Fienza’s cast stone solid surface products are a cut above the rest, showing no yellowing or cracking over time. This quality solid material can also be sanded and re-finished as new.

Specifications:

Dusk Yellow Finish
Fluted design
Solid surface
Outer Dimensions: 400 x 400 x 120 mm

Also available in Matte White, Matte Black, and Forest Finishes

Buying FIENZA ‘Minka’ Solid Surface Round Above Counter Basin from Infinity Plus Bathrooms.

Fienza’s cast stone solid surface products are a cut above the rest, showing no yellowing or cracking over time. This quality solid material can also be sanded and re-finished as new.

Specifications:

Product SKU: CSB802D

Also available in Matte White, Matte Black, and Forest Finishes

Dusk Yellow Finish
Fluted design
Solid surface
No tap hole without overflow
Requires 32 mm non-overflow waste (not included)
Outer Dimensions: 400 x 400 x 120 mm
Bowl Depth: 95 mm
Capacity: 10 litres
Weight: 5.8kg

Cleaning & Care

Wipe with a clean, soft cloth and mild soapy water or non-abrasive bathroom cleaner. Test in an inconspicuous area before cleaning the whole basin.
Avoid placing hot objects, such as hair straighteners, on any surface as these will cause discolouration and marking.
Spills of hair dye, after-shave lotion, nail polish and remover, aerosol spray and other harsh chemicals should be removed immediately to prevent damage and discolouration. Clean, Soft cloth.

While we aim to ensure specifications are correct at the time of publication, Fienza reserves the right to make modifications without prior notice. Physical colour may vary from the image shown. All measurements are shown in millimetres. For ceramic products, please allow +/- 10 mm tolerance for manufacturing variance. Always use physical product measurements for mark-ups and roughing-in as the technical drawing may differ from the actual product received.